The Bunny Ears

When it came time to making a set of bunny ears for my white rabbit costume, I went hunting around on the internet for some inspiration. I found some great images and some horrible tutorials, so I thought I would add to it all with a tutorial of my own (hopefully not horrible).

I took the same approach that you would take if doing millinery, so there is no glue involved in my process.

Materials – paper, pen, scissors

Step 1
Come up with your pattern. After looking at many pictures of adorable bunnies and bunny costumes, I decided to make my ears in proportion with my head. I measured the height of my head to choose the length. From there, I measured a flat point of 7cm across the bottom and then free-handed the curve of the ear. I folded the ear in half and made sure both sides were the same.

Materials – paper scissors, stiff buckram, millinery wire, pliers, fabric scissors, bunny fur (outer ear), polar fleece / felt (inner ear), small embroidery or manicure scissors, matching thread, hand-sewing needle, fabric pen

Step 2
Transfer your pattern shape onto your buckram and cut out directly. This is what the paper scissors are for (you don’t want to destroy fabric scissors). Cut out the same shape in the inner ear fabric. Trace the ear shape with about a 2.5cm seam allowance onto the wrong side of the fur fabric. Use the small embroidery scissors to slide along the wrong side of the fur fabric to cut out your shape. Make sure to cut two of each.

Step 3
Cut a length of millinery wire long enough for the edge of the ears plus about 20cm. Leaving 10cm at the end of the ear, start sewing the wire to the edge of the buckram. I use a simple whip stitch using a double strand of thread. Repeat on the other ear.

Step 4
Position in the inner ear fabric onto the buckram on the same side as the wire. Stitch the fabric on with a running stitch close to the edge.

Step 5
Trim your fur. Using your embroidery scissors, trim about 1cm of fur away from the backing. This will be the seam. The reason for trimming is to make it neater to sew on and reduce the bulk from the seam. It also stops extra bits of fur from getting caught in the seam.

Step 6
Position the buckram ear onto the centre of the fur. Wrap the fur around the edge, fold in your seam allowance and pin in place. It can be a little bulky around the top of the ear, but if you just ease it in, it will fit.

 Step 7
The tricky part. I used a whip stitch here, but you can use what you feel comfortable with. Slide your needle under the edge of the fur fabric, catching in the inner ear lining fabric. This is to sew the fur to the ear. Sew all the way around the ear to secure. You may need closer stitches at the top of the ear to secure the eased fabric.

Step 8
Now you can attach your ears to your chosen headpiece. If you are going for a headband, pick a tight one, the ears can weigh quite a lot. Once attached, bend the ears to your chosen position.

Alice takes tea

On Saturday, I attended an event with the Australian Costumers Guild – a trip down the rabbit hole for an Alice In Wonderland themed High Tea. We made the journey over to Mount Gravatt to the Willows Tea Room where two of our members had booked us in.

We had a smaller collective of members in attendance, but we all had a lovely time. We had three Alice’s – a blonde, a brunette and a red head. We had three red queens – a Disney, an inspired by and a Tudor. And me, as the white rabbit.

The food was lovely and a great spread for the price with an assortment of sandwiches, scones, tiny cakes and cookies and mousse to finish it off. I chose to sip from a cup of Super Hero tea – a tasty green tea blend with citrus and mint. The combination proved a little too rich for me after a previous bout of food poisoning at an ill-fated trip to the pancake manor, but it was a lovely afternoon out.

As for my white rabbit costume, when I was planning for the event, I couldn’t decide which way to go. I have done Alice before and didn’t have any aspiration to repeat it. And I’ve done the White Queen which I wore out and no longer have. I then had the difficulty of tossing up doing the Mad Hatter (done that too), the Cheshire Cat, or the White Rabbit. I decided to be a bunny. I used the pattern that I had drafted up for my Saber Lion costume, so it was a simple matter of recutting it out in white polar fleece. I added a padded fur tummy patch, leather footsies, and a tail. Then came the ears (which I will follow up with a tutorial). I attached them to a plastic headband and hid it in my white hair. I topped the ensemble off with a few piece from my Lolita collection – a vest, a neck frill and a bow tie. I’m not 100% sure that I like how it turned out, but a bunny suit will always come in handy in the future – it’s just not a great idea for warmer weather.